Version_three - Flipbook - Page 122
PLUMBING - PUMPS & ACCESSORIES
WHALE ORCA BILGE PUMPS
A range of compact, high
performance submersible bilge
pumps which are designed to be
installed in small spaces deep
in the bilge. The large filter base
ensures maximum surface area
exposed to bilge water and the
clip off top allows easy access to
the motor cartridge & filter area
for cleaning.
HEAVY DUTY MACERATOR PUMP
“built to last and with a full
range of spares available”
Macerator pump with stainless
steel and technopolymer pump
body and rubber impeller
discharge pump. This pump is
made in the EU and built to a
very high specification earning it
our ‘heavy duty’ label.
• Self priming up to 3 metres vertically (max 4 metres total head)
NEW
SAVE
A
AVE
£15.26
• Simple installation – multiple
wire locations, extra long wires •
Low amp draw means long battery life • Robust ABS fuel-resistant housing • Available in a range
of 3 flow capacities - 500, 950 and
1300 GPH
• 43 Litres/minute output
• Maintains a flow rate of 23 litres/min at a 3 metre head!
• Macerates and discharges water and waste mixtures - ideal for holding tanks.
• Heavy duty motor • 38mm Hose tail for input • 25mm outlet hose tail
• Comprehensive range of spare parts available (see below)
• Pump (including motor) made in the EU
830322 Orca 500GPH • 12V • ¾” Hose • H8.3xW10xD8cm.........................................£24.95 831114 Heavy Duty Macerator Pump 12v RRP£135.21........................................................£119.95
830323 Orca 950GPH • 12V • 1” Hose • H11xW13.5xD10cm .....................................£34.95 SP5500000005 Service Kit • Impeller, O Ring & Seals...........................................................£21.75
830324 Orca 1300GPH • 12V • 1” Hose • H13xW16.8xD12cm ................................£46.95 SPPL000MC002 Replacement Macerator Blade..............................................................................£9.45
830325 Orca 1300GPH • 24V • 1” Hose • H13xW16.8xD12cm .................................£55.95 SP6000000912 Replacement Motor Only • 12v........................................................................£73.95
SEAFLO FIELD SENSING BILGE PUMP SWITCH
NEW
This bilge switch senses the water level and
automatically controls a 12V or 24V bilge pump.
The switch turns on when it senses 41mm water
level and turns off when water is below 9.5mm
• Rated to handle pumps up to 20 A at 12 V or
10 A at 24 V • No moving parts, totally sealed • 3
second delay prevents false starts • mounted on either
horizontal or vertical surface (e.g. bulkhead or hull) •
Supplied with 1m of cable • 4 Year Warranty
GULPER 320 MULTI-PURPOSE WASTE PUMP
A versatile, high capacity, waste pump for
bilge, shower, sink, grey waste & fishbox
drainage. Mounted remotely, it’s ideal where
space is at a premium.
SAVE
up to
£31.12
• Meets requirement for primary bilge
pump for boats up to 12m • Non-choke
valves – no filter to block or clean • Built-in
non-return valve • Double outlet valves for
continuous flow • Easy to install - only 3
screws to secure • Head rotates 360deg to
suit your installation • Self-primes & runs dry
• 19 & 25mm hose connections
• Flow rate: Up to 19L per min
• Body Size: L280xW110xH120mm
• Includes ¾” remote strainer
831003 Field Sensing Switch................................£31.95
WHALE SUPERSUB BILGE PUMPS
SAVE
up to
£7.92
830449 Gulper 320 • 12V RRP £228.38...........................................................................................£214.95
830598 Gulper 320 • 24V RRP £256.07.........................................................................................£224.95
LAGUNA DIGITAL FLOAT SWITCH
Featuring a low profile design for narrow bilges, these bilge pumps can be installed on either
horizontal or vertical surfaces with the outlet in a horizontal or vertical position. They feature a
removable strainer for easy cleaning & are designed to leave the bilge almost dry. • 12V
830339 Supersub 500 • Flow Rate: 32L per min / 500gph • L183xW75xH75mm
• Hose Size: 19mm RRP £47.87..............................................................................................£39.95
830510 Supersub 1100 • Flow Rate: 66L per min / 1050gph • L215xW55xH75mm
• Hose Size: 25mm RRP £63.83..............................................................................................£57.95
This clever digital sensor switch has
water level sensors that are totally
sealed and are never in contact with
water, assuring a high level of corrosion
resistance • Activates at a 50 mm (2”)
fluid level • Deactivates at a 20 mm
(3/4”) fluid level • Five second delay
prevents false starts • Max 20 amps • No
moving parts • Totally sealed, solid state
electronics • Contains no mercury
• Certificated according to ISO 8846
marine EN 55014 • Dimensions:
100x55x30 mm
NEW
WHALE SUPERSUB SMART BILGE PUMPS
“proven over 20 years”
★★★★★
5 STAR REVIEW
A fully automatic bilge pump featuring a
low profile design for narrow bilges or small
spaces. It has solid state switching - no
moving parts - so is unaffected by wave
motion & is environmentally friendly mercury free. It can be mounted vertically or
horizontally & features a removable strainer
for easy cleaning & is designed to leave a
minimum water level of 10mm in the bilge.
• 12V
831107 Digital Float Switch............................£31.95
WHALE HANDY PUMP
A very useful portable hand pump to
keep on board to pump out dinghies,
cockpit lockers etc. Also suitable for
diesel transfer. Available in 2 sizes,
both supplied with a metre of 25mm
Dia. hose. Flow rate: up to 31L per min.
Easybailer 35: L19”, Easybailer 55: L27”
SAVE
up to
£4.29
830384 Supersub Smart 650 • Flow Rate: 40L per min 650 US gals per/hr
★★★★★
5 STAR REVIEW
• L212xW54xH75mm • Hose Size: 19mm RRP £82.55....................................£79.95
830512 Supersub Smart 1100 • Flow Rate: 69L per min 1100 gals per/hr
830070 Easybailer 35 Pump RRP £34.42 .........................................................................................£31.95
• L240xW54xH75mm • Hose Size: 25mm RRP £152.51..............................£134.95 830450 Easybailer 55 Pump RRP £38.24 .........................................................................................£33.95
WHALE HOSE FITTINGS
WHALE NON-RETURN VALVES
Designed to fit in-line • Provides an easy
way to maintain prime in a suction or
discharge line • Suitable for use with
manual or electric pumps
830385 19/25mm (¾”) ..................................................£22.95
830386 25/38mm (1”/1½”) RRP £17.58..........£16.95
122
Whale pump/hose elbow fittings. Ideal for
use in installations in confined spaces.
A
B
C
830393 A) 25mm (1”) RRP£9.47...............£8.95
830392 B) 38mm (1½”).................................£15.75
Enables two pumps to discharge through a
single line. Ideal for use when a diverter is not
required • Size: 38mm/1½”
830391 C) Y-Piece RRP£20.65...................£19.95
